Operation Manual

2
User’s Guide
2. Installation
2.1 Install the Pedestal
To attach the base to your monitor, please follow the steps for installation of
the pedestal as below:
2.2 Connect your monitor to computer
1. Turn off the computer and unplug the power cable.
2. Connect the signal cable to the signal port on the back of the computer.
3. Connect the DC plug of the AC-DC adapter to the DC 12V port at the
rear of the monitor. Connect the power cord to the AC-DC adapter and
wall outlet.
4. Press the power button, located on the bottom side of the main unit to
turn the monitor on and then turn the computer on. If the monitor
displays an image, the monitor is successfully installed. If no image is
displayed, check all connections.
Connecting the monitor to the computer and the power supply