User Manual

7 Care and maintenance

▸ Open the rinse agent reservoir by pushing the

release catch in the direction of the arrow.

▸ Fill with rinse agent up to the «max.» mark

(1.3dl suffices for about 35 wash cycles).

▸ Close the cover.

▸ Wipe away any spilt rinse agent.

7.7 Water inlet filter, cleaning

Have the water inlet filter cleaned by experts only. If carried out in-

correctly, there is a risk of flooding!

The built-in water inlet filter can become blocked by limescale deposits, rust or

foreign objects.

This can lead to a

A9 Check water inlet

error message.

▸ Turn off the water tap.

▸ Loosen the connection 1.

▸ Remove the water inlet filter 2 using pointed

pliers and then clean or replace.

▸ Clean the seal 3.

▸ Replace the water inlet filter 2 and seal 3.

Tighten the connection 1 on the water tap.

▸ Turn on the water tap and check for leaks.