Operation Manual

19
4 Operating the appliance
The individual cooking zones are all operated in the same way. When the
appliance is switched off, all the displays are dark (stand-by mode), except
for the residual heat indicator should any cooking zone still be hot.
4.1 Switching the appliance on and off
➤ Switch the appliance on: Press and hold the touch button for about
1second.
– flashes in all the power level displays.
– If no other entry is made, the appliance switches off after about
10 seconds for safety reasons.
➤ Switch the appliance off: Press the touch button.
4.2 Selecting a cooking zone
➤ Press the touch button for the required cooking zone.
– flashes in the corresponding power level display.
– The selection indicator for this cooking zone illuminates.
➤ Press or slide a finger along the slider to set the power level.
The settings for a cooking zone can only be changed if the corre-
sponding selection indicator is illuminated.
Once the selection indicator goes out, the cooking zone must be
selected anew.