Operation Manual

4 Care and maintenance
16
Installing the grease filters
➤ Push in the flat pull-out deflector plate 1 completely.
➤ Take hold of the grease filter and insert fixed centring pins on one side
(either left or right) into the slots for the upper grease filter.
➤ Pull back the centring pins on the other side using the handle 2 and slot in.
➤ Insert the lower grease filter in the same way.
All centring pins must sit correctly in the slots. Only then can the
handle 2 be folded in. Press it lightly to do this. It must be flush with
the grease filter.