Operation Manual

11
3Use
3.1 Switching appliance on
The illumination and the extractor fans
can only be switched on when the flat
pull-out deflector plate has been
pulled out.
➤ Pull out the flat pull-out deflector
plate.
3.2 Switching extractor fan on and off
➤ Slide the sliding switch to , or
. Only operate level for a short
time (a few minutes), then switch to
a lower level.
➤ To switch off, set the sliding switch
to .
The appliance is most effective when the flat pull-out deflector plate is
completely pulled out.
We recommend switching on the appliance on level 5 minutes
before you start cooking. Leave the appliance running for about
15 minutes after cooking so that the smells are extracted.