Operation Manual

… Use
13
Switching the automatic running-on function on/off
A To switch on the automatic running-on function during operation, press the
button.
– The running-on time is activated. This is indicated and confirmed by the
lighting up of the last selected power level and the readiness indicator.
The runnning-on times are individually specified for the respective power
level.
䡲 Power level 1 = 20 minutes
䡲 Power level 2 = 15 minutes
䡲 Power level 3 = 10 minutes
䡲 Power level P = 5 minutes
– After the specified time, the fans automatically switch off.
A To switch off the automatic running-on function, press the button
again.
– The readiness indicator stops flashing. Operation continues at the set
power level.
Switching the illumination on/off
A To switch on, press the button.
A To switch off, press the button again.
The illumination can always be switched on or off. It is independent of the
operating mode or the position of the glass shield.