Operation Manual

… Use
14
Saturation indicator of metal grease filter
The saturation indicator of the metal grease filter lights up after 40 hours of
operation. The saturation level has been reached.
– The current extraction level flashes alternatingly with in the digital
display.
A The grease filter must be cleaned.
Resetting the saturation indicator
A Depress the button for 3 seconds.
– The indicator light goes out.
Activating/deactivating the saturation indicator of the standard activated
charcoal filter
A To activate, hold the buttons and pressed until lights up
in the digital display.
A To deactivate, hold the buttons and pressed until goes out
in the digital display.
The saturation is not displayed in stand-by mode.
Only activate this function if the appliance is used as a recirculation
model.