Operation Manual

4 Care and maintenance
16
Removing the grease filter
➤ Pull out the glass shield completely.
➤ Pull the grip flap 2 in the centre recess on the grease filter toward the back.
– The grease filter 1 is unlocked and can be taken out toward the bottom.
➤ Cleaning the grease filter.
Installing the grease filter
➤ Pull out the glass shield completely.
➤ Grasp the grease filter and make sure that the grip flap 2 is facing down.
Insert fixed centring pins at the back in the retaining slots in the housing.
➤ Ensure that all centring pins are seated in the correct retaining slots. Only
then will the grip flap 2 latch completely in place.
– The grease filter is correctly inserted if it lies flush with the housing.
21