Operation Manual

4 Care and maintenance
16
Removing the grease filters
➤ Push the deflector plate 1 completely in.
➤ Press right or left edge of grip flap 2 so that it folds down and can be
gripped.
➤ Hold the grip 2 and pull towards the middle of the appliance.
– This releases the grease filter, allowing it to be removed.
➤ Remove the upper grease filter in the same way.
➤ Clean the grease filters.
Installing the grease filters
➤ Push the deflector plate 1 completely in.
➤ Holding the grease filter, guide the centring pins on one side (either left or
right) into the receiving slots for the upper grease filter.
➤ With the grip flap 2, pull back and engage the centring pins on the other
side.
➤ Install the lower grease filter in the same way.
All centring pins must sit correctly in the receiving slots. Only then can
the grip flap 2 - applying light pressure - be folded back up. It must be
flush with the grease filter.
2
1