Operation Manual
15
EN
CHANGING THE QUANTITY OF MILK AND COFFEE
FOR CAPPUCCINO
The appliance is set by default to automatically deliver standard
quantities.
To change these quantities, proceed as follows:
1. Place a cup under the coee spouts and milk spout.
2. Hold the button (B8) until the message “MILK FOR
CAPPUCCINO PROGRAM QUANTITY” is displayed.
3. Release the button. The appliance starts delivering milk.
4. Once the required quantity of milk has been delivered into
the cup, press the button (B8) again.
5. After a few seconds, the appliance starts delivering coee
into the cup and the message “COFFEE F. CAPPUCCINO
PROGRAM QUANTITY” is displayed.
6. Once the required quantity of coee has been delivered into
the cup, press the button (B8) again. Coee delivery
stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
MAKING LATTE MACCHIATO OR CAFFELATTE
• Preparetheapplianceasdescribedtomakecappuccino.
• Beforeattachingthemilkcontainertothenozzle,position
the froth regulator between the words CAPPUCCINO and
CAFFELATTE printed on the milk container lid.
If the froth is not satisfactory, move the regulator slightly
until you obtain the required froth.
• Pressthe button (B9) to request a latte macchiato.
or
• Pressthe button (B10) to request a caelatte and af-
ter a few seconds, frothed milk ows out of the milk spout
into the cup below. (Delivery stops automatically). Milk
delivery stops and the appliance starts delivering coee.
CHANGING THE QUANTITY OF COFFEE AND MILK
FOR LATTE MACCHIATO/CAFFELATTE
The appliance is set by default to deliver standard quantities of
coee or milk.
To change these quantities, proceed as follows:
• Fillthecontainerwithmilkuptothemaximumlevelindi-
cated on the container.
• Press the button corresponding to the preparation you
want to modify, latte macchiato (B9) or caelatte
(B10) for at least 8 seconds until the appliance displays
“MILK FOR MACCHIATO PROGRAM QUANTITY” or “MILK FOR
CAFFELATTE PROGRAM QUANTITY”
Then release the button.
The appliance starts delivering milk.
• Oncetherequiredquantityofmilkhasbeendelivered,press
the button selected previously. Milk delivery stops and the
quantity is memorised.
• Afterafewseconds,theappliancedeliverscoeeintothe
cup and displays “COFFEE FOR MACCHIATO PROGRAM QUAN-
TITY” or “COFFEE FOR CAFFELATTE PROGRAM QUANTITY”.
• Oncetherequiredquantity ofcoeehasbeendelivered,
press the button selected previously. Coee delivery stops
and the quantity is memorised.
The appliance is now reprogrammed with the new settings and
the message “COFFEE STANDARD” is displayed.
CLEANING
Cleaning the machine
Do not use solvents or abrasive detergents to clean the coee
machine.Asoftdampclothwillsuce.
NEVER wash any of the components of the coee machine in the
dishwasher.
The following parts of the machine must be cleaned regularly:
• coeegroundscontainer(A4),
• driptray(A14),
• watertank(A12),
• coeespouts(A13),
• pre-groundcoeefunnel(A21),
• insideofthemachine,accessibleafteropeningtheservice
door (A2),
• infuser(A5).
Cleaning the coee grounds container
When “EMPTY GROUNDS CONTAINER” is displayed, the grounds
container must be emptied and cleaned.
To clean:
• opentheservicedooronthefrontoftheappliance(g.16),
extract the drip tray (g. 17) and clean.
• Cleanthegroundscontainerthoroughly.
Important! When extracting the drip tray, the groun-
ds container must always be emptied.
Cleaning the drip tray
Important! If the drip tray is not emptied the water
might overow.
This could damage the machine.
The drip tray is tted with a level indicator (red) showing the
level of water it contains (g. 28).
Before the indicator protrudes from the cup tray, the drip tray
must be emptied and cleaned.
To remove the tray:
1. Open the service door (g. 16).