Operating instructions

5 Drying
36
5.1 Programme selection
«Tip and go»
An automatic programme can be selected with the press of a single button.
All the necessary settings for the programme are made automatically.
Additional functions can be selected or deselected by pressing the corre-
sponding button.
If no buttons are pressed within 20 seconds, the drying programme selected
starts automatically.
Duration remaining indicator
The expected programme duration is displayed when selecting the
programme. This refers to a similar wash composition with defined weight.
Load determining takes place after the programme start:
Use the
PROGRAMME OVERVIEW to determine which programme is
the most suitable for your washing.
– In the display appears:
– The letter «h» flashes:
The expected remaining duration is calcu-
lated and then displayed.
The actual running time can vary from the displayed duration
according to the fabric type. Therefore the indicated remaining
duration can stay unchanged for a few minutes, especially towards
the end of the programme. During this period the letter «h» flashes
and the remaining duration calculation is carried out anew.
– The letter «h» starts to flash again and the
display shows:
– The achieved level of dryness is shown
alternately.
– The remaining duration is calculated anew
and then displayed.
Determining load 1h35
Calculating remaining time 0h15