Operating instructions

… Trouble-shooting

… the water rate of flow from the circulation nozzle is too low

… the washing load is still dry at the end of the programme and no error

message is displayed

Possible cause Solution

䡲 The circulation nozzle is

clogged.

A Clean the nozzle.

䡲 The foreign body trap is

clogged.

A Clean the foreign body trap.

Possible cause Solution

䡲 «Demonstration mode» is

activated.

A Open the appliance door.

A Keep buttons and depressed

A Simultaneously press button .

– In the graphic display appears:

A Press button once again.

– In the graphic display appears:

Demonstration mode

OFF