User's Manual

8 User settings
▸ Touch the button to save the selected
setting.
Settings
SN 12013 000123
Background
image
Language
English
1/3
1/3
▸ Touch the button to select and change
any other settings.
▸ Touch the button to exit user settings.
8.2 Brightness
The display can be adjusted to the prevailing light
conditions.
▪ Dark
▪ Medium bright
▪ Bright (factory setting)
▪ Very bright
8.3 Button tone
The button tone can be turned on and off. The but-
ton tone for the and buttons cannot be
turned off.
▪ On (factory setting)
▪ Off
8.4 Viewing angle
The readability of the TouchDisplay is improved
when viewed from below at an angle.
▪ : TouchDisplay viewed
from above (factory setting)
▪ : TouchDisplay viewed
from below
8.5 Language
The language is set during the initial set-up of the
appliance. It can be changed.
▪ German
▪ …
8.6 Background image
The background image of the TouchDisplay can be
turned off. In this case, the background appears
black.
▪ On (factory setting)
▪ Off
8.7 Level of dryness
Change the level of dryness if the washing is not be-
ing dried sufficiently or is being overdried. The new
level of dryness applies to all programmes. A low
level of dryness (low final drying) is recommended
for very hard water and a high level of dryness
(strong final drying) for very soft water.
▪ For very hard water
▪ For hard water
▪ For normal water (factory
setting)
▪ For soft water
▪ For very soft water
Risk of overdrying!
Overdrying can weaken fabrics.
23