Installation Guide

Installation instructions
Heat pump dryer
One-family household
1068340-R03
31/10/2019
1068340-R03
5
Positioning in a niche
If a tumble dryer or a washer-dryer tower is installed in a niche, a 130° door stop must be provided (article no.
W54086).
If the niche is fitted with a door, it must be ensured that the door is left open for the duration of the process. The
niche door and the appliance door must be hinged on the same side.
3
1
00
1
00
2
1
≥605
≥860
≥1710
≥45
▸ Centre the installation plate in the niche.
▸ Distance to the back wall: ≥45mm
▸ Cut-out for lateral connections (left or
right): ≥100 × 100mm
▸ Niche height for tumble dryer: ≥860mm
▸ Niche height for washer-dryer tower:
≥1710mm
4
A
D
B
C
D
=
50
A
≥
605
1
2
D
=
83
A
≥
645
A
B
C
D
Variant 1: Tumble dryer door C is flush with
niche front B:
▸ Niche depth A≥605mm
▸ Installation offset for installation plate
D=50 mm
Variant 2: Washing machine door C is flush
with niche front B:
▸ Niche depth A≥645mm
▸ Installation offset for installation plate
D=83mm
The condensed water hose must not be crushed between the rear of the appliance and the building wall.