Installation Guide

Installation instructions
«Front loader» washing machine
One-family household
1064373-06
22/10/2021
1064373-06
4
4. Positioning the installation plate
General tips
Use the installation plate supplied to install the appliance. It fixes the appliance in position, and is for use with both
free-standing appliances and appliances positioned in a niche.
The use of an unsuitable installation plate or a soft, sound-insulating underlay can affect the proper functioning of the appli-
ance.
In case of underfloor heating, do not drill holes in the floor! Adhere installation plate into place!
1
E
D
45
▸ Fold out spacers D in order to keep dis-
tance to the back wall.
3×
1
2
2
ø5
Variant 1: Without underfloor heating:
▸ Fasten installation plate to the floor with
3screws.
▸ Dampen mounting slots E with water to
make the appliance easier to push in.
Variant 2: With underfloor heating:
▸ Holes must not be drilled in the floor if
the room has underfloor heating. The
installation plate must be adhered to the
floor.
▸ Dampen mounting slots E with water to
make the appliance easier to push in.
Free-standing position
If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5mm between the in-
stallation plates and to the walls at the side and min. 45mm to the back wall. The installation plates for the washing
machine and tumble dryer are the same.
1
45
5
595
510
5
555
D
▸ Fold out spacers D in order to keep dis-
tance to the back wall.
▸ Dimensions 45 and 555 only apply if no
plumbing fittings are to be installed be-
hind the appliance.