ENGLISH 2 WIRE INTERCOM SYSTEM USER MANUAL Main Menu 1 2 3 4 Monitor ...
1 1. Parts and Functions Main Menu Microphone 1 2 3 4 Monitor ...
2 145~160 cm 2. Monitor Mounting 1. Use the screws to fix the Mounting Bracket on the mounting box.(fitting accesories includes a Bracket (Two pieces of 4X25 screws are needed for fastening the Mounting Bracket), Special 2 wire cables to connect with Monitor) 2. Wire the system correctly(see the later connection chapter) then hang the Monitor on the Mounting Bracket firmly. 3. Main Menu 1. Touch the screen anywhere on monitor in standby mode, the date/time page will be showed.
3 4. Basic Door Release Operation 1. Press CALL button on outdoor station, the Monitor rings, at the same time, the screen displays the visitors' image. DS-1 00:23 2. Press TALK/MON Button on monitor or touch icon on screen, you can communicate hands free with the visitor for 90 seconds.After finishing communication,press TALK/MON button again or touch icon to end the communication. If nobody answers the phone, the screen will be turned off automatically after 30 seconds. 3.
4 1. Intercom Call: User in one apartment can call other apartments in the system. the namelist will be created automatically by the system. Touch a name you want on the screen, then touch icon to dial.(Note:1. touch icon again to redial. 2.The DIP switches code of each monitor must set different.) Intercom Call [ 00 ] [ 01 ] [ 02 ] [ 03 ] [ 04 ] [ 05 ] Jim. Zhang Calo. Liu Jacko. Zhang Philips. Chen Hebe. Zhang Tony. Li Exit Calling Next Page 2.
5 Ring Volume and Night Ring Volume Setting You can set a ring volume for day time and night time individually, 6:00 AM~18:00 PM is the day time and 18:00 PM~6:00 AM is the night time by default,if you don't want to be disturbed at night,you can set the night ring volume to 0. Touch User Setup item on main menu page to enter setup page,then touch Next Page item to enter User Setup 2 page, select Ring Volume Setting or Night Ring Volume item.
6 9. Restore to Default Touch User Setup item on main menu page to enter setup page,then touch Next Page item to enter User Setup 2 page, touch Restore to default item ,a message will be asked to confirm the restore operation. If touch icon ,All settings will be restored to default, if you don't want to restore, touch icon to cancel the operation.(Note that the restore to default operation will not change the time setting and the datas.) User Setup (2) Restore to Default Ring Volume ...
7 How to set the slave monitor address Maximum 4 monitors can be connected in one apartment,one master monitor together with 3 slave monitors, so you should set the address correctly.(note:must have one monitor to be set as master monitor) The code of 8000 is used to set the master monitor. The code of 8001 is used to set the first slave monitor . The code of 8002 is used to set the second slave monitor . The code of 8003 is used to set the third slave monitor .
8 How to set the unlock parameter Unlock mode: There are two unlock modes: 1.power-on- to-unlock type:unlock mode=0(by default) 2.power-off-to-unlock:unlock mode=1. The code number of 8010 is used to set the unlock mode to 0 The code number of 8011 is used to set the unlock mode to 1 Unlock time: The unlock time can be changed by yourself at any time.it can be set from 1 to 9 seconds. The code number from 8021 to 8029 are used to set the unlock time to 1~ 9 seconds.
9 11. Screen and Volume Adjustment During monitoring or talking, touch icon,the ADJUST MENU will be displayed. Touch and select the adjustment item you want; touch / icon to decrease / increase the value. 1. The first item is Scene mode selection: Total 4 screen modes can be selected in sequence: Normal, User, Soft and Bright. Whenever you modify Brightness or colour, Scene item will be set to User mode automatically. Scene Bright Color Ratio Talk Volume Exit Normal 6 6 16:9 2 Dec Inc 2.
10 Note
DT-ENG-27TD7-V1 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.
