Manual

It will pop up a window for setting project property.
IP Seg: Select a IP Segment for the new project. We will take 192.168.0.X as an example
in this manual*
Project Name: Name the new project
Project Description: Can input some info about project
Project Mark: Can input some info about project
Insert time line: Insert created time in Project Mark frame.
See the picture above, Benchmark
Project is assumed a 2 wire/IP
system.
Click Save button to save info when
nish
*Note that IP Seg just can be set at
thersttime.It’stosay,IPsegment
isn’teditableafterrstset.
-45-
IP-2 wire system technical guide