Owner's manual

Page 27
K5 System Technical Guide
connected to next distributor
•
PORT-A, PORT-B, PORT-C, PORT-D:
4 output, it can be connected to indoor monitors
•
VD-SET:
Setting for video matching
Specications
Power supply: DC24V
Standby current: 60mA
Working current: 120mA
Working temperature: -10
0
C~40
0
C
Connection port: RJ45
Dimensions: 140*150*60mm
2.3.4.3§C5-F422
C5-F422 is a advanced distributor which can support two audio and video channels at the same
time. Two conversations with video are available at one system by using this device.
Parts and Functions
•
P+, P-:
Power input, DC 24V
•
PA:
Test button
•
S1:
DIP Switch
•
Power:
Power indicator. Always ON
•
IN-USE:
Status Indicator. ON while working
•
LINK:
Signal indicator. Flicker means signal
is transmitted in bus
•
ERROR:
Error indication. ON when equip-
ment failure
•
RS485:
PC Port. Set parameters update the
rmware of C5-IPC by PC RS485-USB convertor
•
JWB (IN):
Bus Signal Input. The port is a RJ45 port includes audio, data & video. It can be con-
nected to last distributor or C5-IPC
•
JWB (OUT):
Bus Signal Output. The port is a RJ45 port includes audio, data & video. It can be
connected to next distributor
•
PORT-A, PORT-B, PORT-C, PORT-D:
4 outputs, it can be connected to indoor monitors
•
VD-SET:
Setting for video matching
PORT-A PORT-B PORT-C PORT-D JWB(IN) JWB(OUT)
VD-SET(L=HIGH)
P-
P+
P-
P+
PA
S1
1
ON
2
T/R- ERROR INUSE LINK POWER T/R+
C5-F422
PORT-A
P+ P- PA
PORT-B PORT-C PORT-D JWB(IN) JWB(OUT)
VD-SET
S1
IN-USE LINK RS485
POWERERROR