Owner's manual

Page 111
K5 System Technical Guide
Assuming that we have that 4 door stations and 8 monitors in each block. And door staions coded
from 1~4; monitors coded from 0021~0024 and 0031~0034.
•
Door station Conguration
DS Config: Right click on A Block
-> Select DS Cong on the pop-up
window -> Config just like the fol-
lowing picture -> Click Save button
to confirm -> Then the software
will check if the door stations just
added are on line or not.
•
Monitor Conguration
Right click on A Block -> Select Monitor Cong ,then we will see the pop up window.