Manual

1. Parts and Funcons
2. Unit Mounng
109mm
124mm
Direct Wall Mounting DIN Rail Mounting
JWB(IN)
S1
RS485POWER
JWB(OUT)
CN(MDS) ETHERNET
JTAG
POWER PA
IN-USE
LINK
VR600
JP1/2/3 SW1
*
PA: Reset button. Press and hold for 3s to
initialize C5-IPC; If initialization complete
successfully, power off, and re-power C5-
IPC, LINK&IN-USE indicators will flicker
once simultaneously, then INK indicator will
icker till IN-USE indicator is always ON
*
S1: DIP Switch. Refer to DIP Switch Setting
*
JTAG: PC Port. Update C5-IPC program by
PC that is connected by RS232 convertor
*
RS485: PC Port. Set parameters update
the rmware of C5-IPC by PC RS485-USB
convertor
*
JWP: Power Input P+: Positive,18V; P-:
Negative
*
JWB (IN): Bus Signal Input. RJ45 port includes audio, data & video. It can be connected to door
station only
*
JWB (OUT): Bus Signal Output. RJ45 port includes audio, data & video. It can be connected to
distributor.
*
CN-MDS: Bus Signal Input. RJ45 port,connected to MDS only
*
CN-NET: RJ45 Network Port, connected to LAN
*
JP1/JP2/JP3: Jumper. Removed if C5-MDS connected
*
SWI: Distributor Setting. Match different distributor