English VIDEO INTERCOM SYSTEM USER MANUAL Main Menu Monitor ... Intercom Alarm Function ... User Setup Close About TALK OK MENU Select Item MONITOR C5-AT25/D4 Version 1.
1. Parts and Functions Microphone LCD Screen OK Select Item Mounting Hook Navigation Button MENU Button TALK Button TALK Speaker MENU MONITOR MONITOR Button Main Connection Port UNLOCK Button LED Indicator CALL Button Mounting Hook 145~160 cm 2. Mounting 1. Fix 2 screws to the wall at a appropriate height 2. Connect the system correctly 3. Attach the monitor to the bracket.
2. Operation Instructions 1. When visitor inputs room number in Door Station of the block or main entrance, the Monitor rings, at the same time, the screen displays the visitor’s image. 2. By pressing TALK Button, you can talk with the visitors for 70 seconds. During talking state, press TALK again to end the conversation. If nobody answers the call, the screen will be automatically turned off after 40 seconds. 3. Press Unlock Button to open the door before or during the conversation. 4.
4. Operation for ring selection Select User Setup item on main menu page to enter setup page.Select Door Station Call Tone, Inercom Call Tone or DoorBell Call Tone item, There are 12 pieces ring tones can be selected.use / Button to select last/next ring tone, press MENU button to save and exit. Door Station Call Tone :set the ring tone calling from outdoor station. Intercom Call Tone :set the ring tone calling from other apartments. DoorBell Call Tone :set the ring tone calling from door bell.
. Date and Time Setting Select User Setup item on main menu page to enter setup page,then use ▲ / ▼ button to select Date&Time Setup... item and pres MENU button to enter. Input date and time by pressing ▲ / ▼ Button to increase / decrease the value; use / Button to select last / next digit. After finish, press MENU Button to confirm and return last page. Date&Time Setup 2010 - 12 - 20 Adjust 17:17 Save&Exit Select 7.
9. Defense Alarm Function(Optional) This system have auto-alarm function to ensure the security for the house owner. Total 4 different sensors were placed to protect different defense area. When the sensor was triggered, the monitor will sent out alarm sound immediately and will sent the alarm signal to the guard center at the same time. Note that your system may not have all the 4 sensors according to the system configuration.
○ Operation instructions： Select Alarm Function on main menu page to enter alarm function page as shown on the right. Alarm Function 1. Select Armed-Out item to trigger defense function,If the armed function is activated,the Alarm Status page will be shown"Status:Armed". 2.
10. Remote Control Function(optional) This function should be customized. Keypad functions of the remote control. [A] Button: Work as Emergency Help Button, press and hold this button for 3s, the monitor will sent out the emergency help signal to the guard center. [B] Button: Arm button, press and hold this button for 1s will arm the system(same result as enter Main Menu--> Alarm Functions menu, select Arm item).
13. Specification ●● ●● ●● ●● ●● ●● ●● ●● ●● ●● Power supply for Monitor: Power consumption: Monitor screen: Video signal: Resolution: Door Camera power: Connecting methods: Ring tune: Operating temperature: Dimensions: 14. DC 15~18V <0.
Please read this manual carefully before using the product you purchase, and keep it well for future use.We reserve the right to modify the specification in this manual at any time without notice.
