Specifications

Version 07.04.2011 VL2-MMI2G
Page4
Requirements
General monitor with 4pin LVDS Mitsumi connector on backside
Vehicle Audi A4, A5 (B8), A6 (4F), A8 (4D/4E), Q7 (4L)
Navigation/Radio Navigation MMI 2. generation
Limitations
Video only The interface inserts ONLY video into the infotainment,
for sound use the FM-modulator or an AUX-in interface
AUX-1xx or a Dension Gateway 500.
1.2. Checking the compatibility of vehicle and accessories
1.3. Dip-switch settings
With the video interface boxes dip-switches it is possible to dis- or enable the interfaces
inputs (dip 1 to 3) and to preselect the type of camera which is (to be)
installed (dip 5).
Dip position down is ON and position up is OFF.
1.3.1. Enabling the interface’s video inputs (dip 1-3)
Only the enabled video inputs can be accessed when switching through the video sources. It
is recommended to enable only the required inputs.
Dip
Video-input
ON (down)
OFF (up)
Dip 1
RGB
enabled
disabled
Dip 2
Video IN1
enabled
disabled
Dip 3
Video IN2
enabled
disabled