Video-inserter VL2-MMI2G for Audi with MMI2G navigation system Video-inserter with 2 video + RGB + rear-view camera input Version 07.04.
Contents 1. Prior to installation 1.1. 1.2. 1.3. 1.3.1. 1.3.2. Delivery contents Checking the compatibility of vehicle and accessories Dip-switch settings Enabling the interface’s video inputs (dip 1-3) Rear-view camera settings (dip 5) 2. Installation 2.1. 2.2. 2.3. 2.4. 2.5. 2.6. Place of installation Connections Installation procedure – function check Picture settings Audio insertion Connecting 2 AV sources 3. Interface operation 4. Specifications 5.
Product features RGB-input for after-market navigation 2 video-inputs for after-market devices (e.g. DVD-Player, DVB-T tuner, …) Built-in audio-switch Rear-view camera input, automatically switching Factory rear-view camera compatible PAL/NTSC input compatible Wrong-plugging circuit protection 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1.
1.2. Checking the compatibility of vehicle and accessories Requirements General monitor with 4pin LVDS Mitsumi connector on backside Vehicle Audi A4, A5 (B8), A6 (4F), A8 (4D/4E), Q7 (4L) Navigation/Radio Navigation MMI 2. generation Limitations Video only 1.3. The interface inserts ONLY video into the infotainment, for sound use the FM-modulator or an AUX-in interface AUX-1xx or a Dension Gateway 500.
1.3.2. Rear-view camera settings (dip 5) Depending on whether no camera, after-market camera or factory camera shall be used, dip 5 must use different settings. If set to OFF, the interface switches to factory LVDS picture Rear-view Dip 5 when the reverse gear is engaged to display factory rear-view camera type camera or factory PDC picture.
2.2.
2.3. Installation procedure – function check Follow the below procedure using the “Connections” scheme from chapter 2.2. as reference. Before the installation of the sources and the interface we recommend a first quick connection of the interface and test run to ensure that vehicle and product are compatible. Due to changes in production of the vehicle manufacturer there is always the possibility of incompatibility.
2.4. Picture settings After installing the sources the picture settings can be changed using a pen on the buttons of the video interface. Press the MENU button to open settings menu on the OSD and to switch to the next setting. UP and DOWN change the corresponding values. The buttons are embedded in the housing to avoid accidental changes during or after installation. 2.5. Audio insertion This interface can only insert video into the factory infotainment.
3. Interface operation The NAV button is used to execute interface functions. Press NAV button – video input switching, Each press will switch to the next enabled input. If all inputs are enabled the order is: Factory video RGB-in video IN1 video IN2 factory video … Inputs which are not enabled are skipped. If the audio cable is connected, when switching from video IN1 to video IN2, also the sound will be switched. 4.
