User Manual

Installation Instructions

1. Using quality HDMI cables, connect an HDMI source (such as

Blu-ray, games console, satellite/cable TV, media server etc.) to

HDMI IN of the Transmitter.

2. Connect a good quality CatX cable between the HDBT OUT of the

Transmitter and the HDBT IN input of the Receiver.

3. Connect the HDMI display device (LED/LCD display or projector)

to the HDMI OUT of the Receiver.

4. Connect IR emitters from the IR OUT ports of Transmitter and

Receiver and firmly attach the IR emitter eye directly over the

infrared receiving sensors of the source and display device to be

controlled. Location of the emitter eye on each device may need

to be adjusted later to achieve best IR performance.

5. Insert IR receivers into IR IN ports of Transmitter and Receiver.

Position the IR receiver eye on or near the display or source

device, ensuring a clear line of sight to the remote handset used

to control it.

6. Connect the power supply to the Transmitter or Receiver and

power on all devices.