Specifications

Page: 16
INTERNAL FUNCTIONS
(F8) Tare Mode Selection
a) Use the procedure described above to reach Function F8.
b) Press MODE/RANGE to enter, and display will show
“X-tArE” (X being the previous selected mode)
n_tArE  Tare function can be used when weight is not
stable
S_tArE  Tare function can be used only when weight
is stable
c) Press MODE/RANGE to select the desired setting.
d) Press TARE to confirm, then press ON/ZERO to return to
normal weighing mode.
(F9) Sound Alarm for HI-OK-LO
a) Use the procedure described above to reach Function F9.
b) Press MODE/RANGE and the display will show XXbEEP
(XX being the setting from the last selection)
nobEEP  disable sound alarm
gobEEP  sound alarm when OK value is reached
HLbEEP  sound alarm when HI/LO value is reached
HbEEP  sound alarm when HI value is reached
LbEEP  sound alarm when LO value is reached
c) Press MODE/RANGE to select the desired setting.
Page: 17
INTERNAL FUNCTIONS
d) Press TARE to confirm, then press ON/ZERO to return to
normal weighing mode.
(F10) Relay Output Mode Selection
a) Use the procedure described above to reach Function F10.
b) Press MODE/RANGE to enter function.
c) Use MODE/RANGE to choose either Act L or Act H.
d) Press TARE to confirm, then press ON/ZERO to return to
normal weighing mode.
Normal Action
Act L
Relay output status
is open
Relay output status
is closed
Act H
Relay output status
is closed
Relay output status
is open