Specifications

Appendix

Attachment: CLAMPS FOR TWIN TANKS

1. Put the clamps onto the double tank. (The setting of the clamps for the tank bottles, as

described on pages 39-40).

2. Turn the screws for the clamps from back to front, towards the backplate.

3. Fix a washer and locking nut from the side you have fasten the screw.

4. Attach an additional washer and locking nut at the other side where the screw is exited.

5. Tighten the nuts so hard, that the clamps do not slip anymore.

6. Slide the bladder with the eyelets on the outward screws.

7. Slide the backplate on the outward screws.

8. Attach a washer and a retaining ring to the screw and tighten with a wing screw.

Arrangement of the screws and washers:

1 2

3 4

Backplate and

Bladder