Specifications

35
English
4. To perform the next setting, thread the end of the straps as described in Point 7 at Page 22.
5. Pull on the system and grasp with the arm over your shoulder. You should be able to grasp
with the ngertips to the top of the back plate.
AFTER THE DIVE
Cleaning the BC, Check, Storage and Transport:
Correct servicing and maintenance guarantees you many years reliable function of your
SCUBAPRO
®
X-TEK BC.
Keep the following instructions for care:
• Fill the bladder with fresh water and shake so that the water reaches everywhere.
• Keep the bladder upside down and press the exhaust button on the inator so that all the
water can drain.
• Disinfect the inner bladder on a regular basis to prevent bacterial growth.
• Rinse the outer shell thoroughly with fresh water.
• Clean all valves so that possible dirt is removed.
• Place a small amount of silicone on the quick release collar for the power inator
attachement (SCUBAPRO
®
silicone grease).
• Slightly inate the bladder and hang it up for drying. Do not dry or store the bladder in
direct sunlight.
• Dry store the BC slightly inated in a cool dry place, protected from direct sunlight.
Inspection and Service Interval:
For your safety your BC should be inspected and maintained at an Authorized SCUBAPRO
Service Center at least once a year, more often if you dive frequently. Any damage caused due to
failure to properly maintain the BC is not covered by the warranty.