Operation Manual

English
11
UWATEC
®
Smart dive computers
2 Operation / 3 SOS mode
3 SOS mode
Activation: automatic
If the diver remains above a depth of 0.8m (3 feet) for more than three minutes
without observing a prescribed decompression, the computer will automatically
switch into SOS mode after the dive.
The display shows the "SOS" sign and the remaining length of the SOS mode.
The dive will be entered in the logbook with "SOS". Other than that the SOS
mode has no further impact on the displays and functions on the surface.
• Serious injury or death may result if a diver does
not seek immediate treatment should any signs
or symptoms of decompression sickness occur
after a dive.
• Do not dive to treat symptoms of decompression sickness!
• Diving in SOS mode is extremely dangerous and you must assume full
responsibility for such behaviour. UWATEC will assume no liability.
Once in the SOS mode, the computer will lock up and will be inoperable as a
diving instrument for 24 hours.
A diving accident can be analyzed at any time in the logbook and downloaded
to a PC by means of the infrared interface (IrDA) and the SmartTRAK software.
Time remaining until
SOS mode switches
off automatically
CNS O
2
%
NO
NO
%
2.6 Active backlight
The display of Smart Z can be illuminated both on the surface
and underwater.
The backlight can be activated by pressing on top of the case.
The light will turn off automatically after 8 seconds or after the
time selected via SmartTRAK.
The backlight can only be activated if the computer display is
on.
2.7 Switching off the display
On the surface Smart Z switches off automatically after 3 minutes without
operation.
WARNING
II