Operation Manual

English
15
III Diving with Smart TEC
III UWATEC
®
Smart dive computers
III
1 Terminology / Symbols
The information on the display of TEC varies depending on the kind of dive and the dive phase.
For information about diving with microbubble levels (MB levels) see chapter V
->28. Specific features of "Diving with more than one gas mixture", are descri-
bed in chapter VI -> 32.
1.1 General terminology / Display during no-stop phase
37 min. Dive time
Elapsed bottom time
No-stop time
24min
Current depth
Maximum depth
26.2 m
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
No-stop phase
Dive phase during which surfacing is allowed
without stop.
Time
Depth
Ascent rate
(Only while
ascending)
SPEED
%
Tank
pressure
Current depth
In metres (feet)
Maximum depth Temperature MB Level…
Maximum depth reached during the dive
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min).
Oxygen toxicity
CNS O
2%
Dive time
Duration of
the dive (min)
O
2% Mix
Selected oxygen fraction
tank 1
%
NO STOP
CNS O
2
%
RBT, Remaining
bottom time
%
DECO
STOP
CNS O
2
%
Total ascent time to surface (7 min)
6 m
35.7 m
Decompression rangeNo-stop range
3 m
Time
Depth
Decompression
stop depth
Deepest stage is
displayed.
Decompression
stop duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
Total ascent time
Including decompression
stops in minutes.
Decompression stop
All required decompression
stops must be observed.
RBT 21 min
Deepest
decompression
stop depth
Decompressionstop duration 2 min
Remaining bottom time, RBT
Maximum remaining time at current
depth including all decompression
obligations (minutes).
1.2 Display during decompression phase / Remaining Bottom Time (RBT)