Operation Manual

English
29
2 Terminology
UWATEC
®
Smart dive computers
V
This chapter will exclusively deal with terminology and display features used while diving with MB levels.
All other features are described in chapter III (page 15).
2.1 Display during microbubble (MB) no-stop phase
Dive time
MB no-stop time
21min
Current depth
Maximum depth
29.9 m
Level stop phase
MB no-stop phase
Dive phase during which surfacing is
possible without MB level stop
.
Time
Depth
MB level
An MB level
between L1 and
L5 was chosen.
MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop
.
CNS O
2
%
NO STOP
2.2 Display during level stop phase
Lowest level
stop depth
Total ascent time (14 min)
3 min
Level stop duration
MB no-stop phase
Time
Depth
Level stop duration
The duration of a level
stop at a given level
stop depth is displayed.
Level stop dept
h
The deepest level
stop is displayed.
Total ascent time
including level stops
Level stop phase
To complete the dive without being
reduced to a lower MB level all
requested level stops must be
observed.
35.7m
9m/30ft
6m/20ft
3m/10ft
CNS O
2
%
LEVELSTOP