Operation Manual


All the gases that have been switched on
(see: Tank setting) are listed on separate
pages. By pressing >> the last page
identifying warnings from the dive are
shown.
In case OTU values for the dive have been
exceeded, the alarm is shown in the list.
The AMD/MOD violations are shown as well.
4. Settings:
The diagram shown on the previous page
highlights the features that have changed
when comparing the Tec SW to the
standard Galileo SW.
4.1 Enabling Trimix - See 4.2
By selecting  -> Dive settings, you
can scroll with up or down buttons to Trimix
selection. By pressing  you go to the
following selection.
With + or – buttons you may switch
between on (enable) or off (disable). By
selecting On, you enable Helium at Tank
settings and allow Helium to be used in
calculations.
F
Note:
 IfyouarenotusingTrimix,thesetting
“off” reduces the complexity in the
Tanksettingsandcomputeruse.