Technical information

9
I UWATEC
®
Aladin
®
dive computers
English
II System and operation
1 System description
Aladin
®
displays all important dive and decompression data.
Aladin
®
has a data memory which stores the dive data. The data can be transmitted with an infrared inter-
face (IrDA) and the SmartTRAK software to a Windows
®
personal computer.
The SmartTRAK software CD is included with the Aladin
®
Package. Infrared interfaces are available in PC
stores. A list of recommended interfaces is available on the UWATEC homepage (www.uwatec.com).
2 Operation
On page 5 and 11 you will find an operating schematic.
2.1 Push buttons
Aladin
®
can be operated with 2 push buttons ( ). Operation of the push but-
tons is divided into "press" ( / ) and "press and hold (1 second)" ( / ).
At the surface:
/ • Switch on Aladin
®
(time of day display)
• Comparable to the ENTER or RETURN key of a keyboard
• Enter into the displayed sub menu
• Open the displayed setting
• Confirm or enter the displayed value or setting
/ • Scroll through a menu
/ • Once entered with into a sub menu or setting:
• Increase ( ) or decrease ( ) the indicated value
• Change the setting
• Switch on the backlight
• Exit the current function or menu and switch to the time of
day display
• Switch off Aladin
®
Under water:
• Access alternate displays
• TEC Set bookmark
• Switch on the backlight
•
Activate the safety stop timer (dive mode only, in depths < 6.5 m
/ 20 ft)
TEC Gauge mode (stopwatch):
• Start / Restart (while stopwatch is active)
• Stop and exit stopwatch
Aladin
®
TEC
Infrared Interface
(option)
Infrared port
Push Buttons
Water Contacts
SmartTRAK
II
Aladin
®
PRIME