Operation Manual

English
9
II UWATEC Aladin PRIME
II System and operation
1 System description
Aladin displays all important dive and decompression data and has a memory which stores the full dive
data. The data can be transmitted with an infrared interface (IrDA) and SmartTRAK software to a Windows
®
personal computer.
SmartTRAK software CD is included with the Aladin package. Infrared interfaces are available in PC stores;
a list of recommended interfaces is available on our website (www.scubapro-uwatec.com).
2 Operation
On page 5 and 13 you will find an operating schematic.
2.1 Push buttons
Aladin can be operated with two push buttons ( ). Operation of the push but-
tons is divided into "press" ( / ) and "press and hold (1 second)" ( / ).
At the surface:
/ • Switch on Aladin (time of day display)
• Comparable to the ENTER or RETURN key of a keyboard
• Enter into the displayed sub menu
• Open the displayed setting
• Confirm or enter the displayed value or setting
/ • Scroll through a menu
/ • Once entered with into a sub menu or setting:
• Increase ( ) or decrease ( ) the indicated value
• Change the setting
• Switch on the backlight
• Exit the current function or menu and switch to the time of
day display
• Switch off Aladin
Under water:
• Access alternate displays
• Switch on the backlight
• Activate the safety stop timer
(dive mode only, in depths < 6.5m / 21ft)
2.2 Water contacts
On submerging in water the water contacts switch on Aladin automatically .
If you have chosen the option " Water contacts off " ( " set 1 " , ->32), Aladin will
turn on with a delay of up to 1 minute into the dive. This will affect functioning
of the computer.
Make sure that the computer is on before starting the dive.
Infrared port
Push buttons
Water contacts
II
Aladin PRIME
SmartTRAK
Infrared Interface
(option)
WARNING