Manualshelf

Operation Manual

ManualsBrandsUwatec ManualsComputer equipmentAladin PRIME
29303132333435363738
English
31
VI Settings
VI UWATEC Aladin PRIME
VI
1 Menu
"
set 1
"
With menu
"
set 1
"
or SmartTRAK you can configure the following items (dive
functions):
NO
Starting from the time of day display push or until
"
set 1
"
appears.
Confirm that you wish to enter into the menu of
"
set 1
"
by pushing .
Once entered into the menu you can scroll with and through the
menu.
Setting
• Maximum partial pressure of
oxygen (ppO
2
max)
•
Time limit to reset the O
2
% mix to air
• Unit system
• Audible attention signals
• Water contacts
• Reset desaturation
Range
1.2-1.6bar
no reset / 1 - 48hrs
metric/imperial
on / off (SmartTRAK: selective)
on / off
on / off
Default
1.4bar
no reset
on
on
no reset
Page
31
31
31
31
32
32
Setting the maximum partial pressure of oxygen (ppO
2
max)
1. Confirm that you wish to change the ppO
2
max
by pushing . The cur-
rent value starts to flash.
2. Change the value in increments of 0.05bar by pushing or .
3. Confirm the selected value with .
Setting the time limit to reset the O
2
% mix to air
1. Confirm that you wish to change the time limit of the reset
by pushing
. The current setting starts to flash.
2. Change the time limit by pushing or .
(1 - 48hrs o
r no reset: "– – h")
3. Confirm the selected value with .
Selecting the units
1. Confirm that you wish to change the units by pushing . The selected
units are displayed (m / ft / °C / °F).
2. Push
. "m" or "ft" starts to flash.
3. Switch with between "m" and "ft".
4. Confirm the selected unit with . "°C" or "°F" starts to flash.
5. Switch with between "°C" and "°F".
6. Confirm the selected unit with .
Switching the audible attention signals on and off
With this option you can switch off the audible attention signals only (the audible
alarms remain active). Refer to page 19 to see this distinction.
1.
Confirm that you wish to change the setting of the audible attention signals
by pushing .
"On" or "off" starts to flash.
2. Switch between "on" or "off" by pressing .
3. Confirm the setting with .
ppO
2
max
Time limit to reset O
2
mix
to air