Operation Manual

English
13
II UWATEC Aladin PRIME
2 Operation
2.4 Switching on the display
• automatically, on submerging in water* or when adaptation to atmospheric
pressure is necessary;
• manually, by pushing
or . If switched on with all segments
light up for 5 seconds.
Afterwards the display shows the time of the day, the O
2
mix and the tempera-
ture.
This display is called time of day display. Most navigation descrip-
tions start from this display. At the surface Aladin returns automati-
cally to this display.
If there is a remaining saturation from the last dive or from a change of altitude,
Aladin also displays the "do not fly" time, the "do not fly" icon, the current
altitude range and the prohibited altitude range (->27).
When Aladin is in state of rest no information is displayed but
the atmospheric pressure is continuously monitored. If a change
in altitude range is detected, Aladin switches on for 3 minutes
automatically ->27.
* Only if the option " Water contacts on " ( " set 1 " , ->32) is chosen. See warning ->9.
STOP
STOP
S
L
O
W
NO
NO
DECO
CNS O2%
DEPTH
NO STOP
DIVE TIME
DESATAMPM
S
L
O
W
2.5 How to navigate Aladin at the surface
Time of day display
Starting from the time of day display you can enter into different menus.
• Reset to air
• ppO
2
max ->31
->31
• Unit system
->31
• Attention beep
on /off
->31
• Water contacts
on /off
->32
• Reset
desaturation
->32
• Alarm clock ->33
->33
• UTC time zone
->33
• Time of day
->33
• 24h / AM PM
->33
• Date
->34
• LCD contrast
->34
• Sound on / off
->34• Electronic ID
->34
• IrDA speed
/
/
Time of day display
O
2
mix /
ppO
2
max
->20
Dive
planner
->28
Logbook
->29
Set 2
->32
Set 1
->31
• Date
• (Desat. time CNS O
2
% )
• Battery condition
->14
->14
->15
Off
II
• Enter with into the
function or sub menu.
• With you can switch
to the time of day display.
• After 3 minutes without
operation Aladin returns to
the time of day display.