Manual

3. Locate the two sets of lock nuts and three metal spacers on the inside of the transilluminator
filter frame, as shown in the image below. Use the 5/16” nut driver to remove the two sets of
lock nuts and spacers.
4. Lift the transilluminator filter frame and place the UV blocking cover below the frame, with the
black tabs on the UV blocking cover hinges protruding through the filter frame as shown
below.
5. Use the narrow walled 3/8” nut driver to secure the four supplied 3/8” hollow nuts to the black
UV blocking cover hinge tabs.
Lock Nut
Three Metal
Spacers
Black Tabs