Operating instructions

5. Close and secure the camera protection hood on the top of Darkroom Hood.

6. Turn on the light source.

7. Capture the image using appropriate software exposure settings.

8. Turn off the light source.

Note: It is important to minimize the light source exposure to the sample. Turn off the light

source as soon as you finish capturing the image.

To View a Sample Prior to Capture

1. Open the sample viewing window on the hood by sliding the protective plate to the right.

2. After you have verified that the sample is correctly loaded, close the sample viewing

window. Otherwise, light from the viewing window will interfere with the capturing pro-

cess.

DigiDoc-It System