Operating instructions

System Operation
Camera Operation
If you will not be using the camera for an extended
period, it is best to turn it off:
To Turn the Camera Off or On
1. Open the camera cap on top of the darkroom
hood.
2. Set the camera mode dial to Off to turn it off or
to A/S/M to turn it on.
3. Close and secure the camera cap on the dark-
room hood.
If the camera is off when you start Doc-It, you will
get a message stating that the application cannot
find any cameras. To remedy this, turn the cam-
era on and click Retry.
When you exit Doc-It, you will be reminded to turn
the camera off to save battery life.
Loading Gels into the Darkroom Hood
Slides are loaded into the Darkroom Hood through
the Sample Loading door in the front. You can ex-
amine the slide through the Sample Viewing win-
dow.
To Load a Gel into the Darkroom Hood
1. Turn off the UV Transilluminator.
1. Open the Sample Loading door in the front of
the Darkroom Hood.
2. Place the sample to be imaged in the center of
the light source filter glass.
3. Close the Sample Loading door in the front of
the Darkroom Hood.
4. Open the camera protection hood on top of the
Darkroom Hood and turn on the digital camera
by turning the camera mode dial to A/S/M.
6
DigiDoc-It System
Sample Loading Door