Operating instructions

DigiDoc-It Imaging System 4
Camera Assembly
To assemble the camera, plug the power cord into the
power supply.
Connect the cable from the power supply to the
battery.
Ensure that the camera is off before inserting the
battery. (The battery may need to be charged before
use)
To insert the battery, slide the battery cover open and
insert the battery until the battery lock clicks.
Close the battery door.
A memory card is required for capturing images. To
insert the memory card, slide the card slot cover open
and insert the memory card into the slot until the card
eject button extends.
Close the card slot cover.
Connect the USB cable to the camera but leave the
other end unplugged until ready to load the software.
Power supply cable
plugged into battery
Power supply
cable
USB cable
DigiCam 110
camera
Power supply
Hex Nut
Power cord
Allen Wrench
Camera Installation
To install the camera, open the camera cap on the top of the hood.