Manual

ManualsBrandsUVP ManualsEquipmentChemiDoc-It 2 Imagers

GelDoc-It

and ChemiDoc-It

Imagers 20

Service Procedures

Return Procedure

A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service before

returning any product.

Replacement Parts and Accessories

To order accessories (including additional emission filters) or replacement parts for the GelDoc-It System,

contact UVP’s offices.

Part Description Part Number

UV Handheld Lamps:

UV Handheld Lamp, 254/365nm, 4 watt (115V) 95-0021-12 (2 Recommended)

UV Handheld Lamp, 254/365nm, 4 watt (230V) 95-0021-10 (2 Recommended)

Fuses:

Fuse, 3.15A (for Darkroom) 56-0022-04 (2 Required)

Fuse, 2A (for Transilluminators) 56-0002-01 (2 Required)

Fuse, 1A (for GelCam 310 Motorized Lens Controller Box) 56-0022-02 (2 Required)

Emission Filters:

Filter, Ethidium Bromide, 50mm Square 38-0220-01

Filter, SYBR Green, 50mm Square 38-0219-01

Filter, SYBR Gold, 50mm Square 38-0221-01

Transillumination Accessories:

LED White Light Plate 95-0476-01

White Light Converter Plate, 21x26cm 38-0191-01

Visi-Blue Converter Plate, 21x26cm 38-0200-01

Gel Accessories:

Gel-Cutter 85-0002-01

Gel-Ruler 85-0003-01

Gel-Scooper 85-0006-01

Gel-Tray, small 85-0007-01

Gel-Sentry DNA Preparation Plate 97-0076-01

Fluorescent Standard Step Tablet 33-0014-02

Protective Equipment:

Spectacles, UV Blocking (UVC-303) 98-0002-01

Goggles, UV Blocking (UVC-503) 98-0002-02

Faceshield, UV Blocking (UVC-803) 98-0002-04

Troubleshooting

No Power to the Darkroom or Transilluminator

1. Recheck the main power cord connection to the GelDoc-It

/ChemiDoc-It

darkroom as well as the

power cables between the darkroom and transilluminator, LED White Light Plate or optional UV

handheld lamps.

2. Check fuses, located at the back of the unit near the power port. A flat-head screwdriver will be

required. Turn the fuseholder cap counterclockwise and the fuse holder will pop out. Inspect the

thin wire within the glass fuse to see if there is a break in the wire. If so, replace the fuse(s). If fuses

are blowing repeatedly, contact UVP Technical Support for additional troubleshooting.