Instruction Manual

ManualsBrandsUVP ManualsHealth and hygiene81-0250-01 Visi-Blue (shipped starting 1/08)

Visi-Blue Transilluminators Page 1

Visi-Blue

™

Transilluminators

Instruction Manual

UVP, LLC Ultra-Violet Products Ltd.

2066 W 11th Street, Upland, CA 91786 Unit 1, Trinity Hall Farm Estate,

Tel: (800) 452-6788 / (909) 946-3197 Nuffield Road Cambridge CB4 1TG UK

Fax: (909) 946-3597 Tel: +44(0)1223-420022 / Fax: +44(0)1223-420561

Web site: www.uvp.com

81-0250-01 Rev C

Summary of content (5 pages)

PAGE 1
Visi-Blue Transilluminators Page 1 Visi-Blue™ Transilluminators Instruction Manual UVP, LLC 2066 W 11th Street, Upland, CA 91786 Tel: (800) 452-6788 / (909) 946-3197 Fax: (909) 946-3597 Ultra-Violet Products Ltd. Unit 1, Trinity Hall Farm Estate, Nuffield Road Cambridge CB4 1TG UK Tel: +44(0)1223-420022 / Fax: +44(0)1223-420561 Web site: www.uvp.
PAGE 2
Visi-Blue Transilluminators Page 2 Introduction Introduction Visi-Blue™ Transilluminators convert 365nm UV to 460-470nm blue light, emitting no harmful UV energy. Visi-Blue Transilluminators are designed for use with GelStar®, GFP, SYBR® green, Vistra Green, SYPRO® Orange and Ethidium Bromide stains. As compared to UV, the blue light can transmit through almost any transparent laboratory equipment (plastic, glass, acrylic, etc.).
PAGE 3
Visi-Blue Transilluminators Page 3 Transilluminator Operation Set Up  Place the transilluminator on a level work surface. Be sure that an air space exists around the bottom of the work surface. This space allows for proper air circulation through the unit.  Plug the female end of the power cord into the transilluminator. For 230 volt models, or those requiring special power cord connectors, ensure that the proper configuration of male connector or plug is properly connected to the power cord.
PAGE 4
Visi-Blue Transilluminators Page 4 3. Remove the reflectors on the left and right sides of the unit. Slide the reflectors up out of the unit. 4. Remove the tube: Carefully rotate the tube 90° and slide out of the socket. Replace with a new tube by sliding the tube into the socket and rotating 90° into place. 5. Insert the reflectors back into place and reattach the filter cover.
PAGE 5
Visi-Blue Transilluminators Page 5 Warranty UVP, LLC. warrants its Ultraviolet Transilluminators to be free of detects in materials and workmanship for a period of two (2) years from date of purchase. The foregoing warranty of UVP shall be of no force and effect if buyer has modified or damaged the product. Tubes and filters are warranted for 90 days.