GPS Vehicle Tracker (GPS+GSM+GPRS) User Manual For GT02 （Version 1.2） UVI Group Corporation 11C, HaiYue Building, HuiJing Garden, Nanshan Technology Park, Shenzhen, China Tel: +86-755-83315079 Mobile: +86-1860-7550 6905 E-mail:kc@uvigroup.com.cn Website: www.uvi-group.com Please read this ma nual ca ref ull y before attempting installation a nd onli ne Acti vation. Pictures a re for i ndication and ill ustratio n purposes onl y.
1. Accessories Battery cables (standard) Locking Bolts (standard) 2. Specification GSM: 850/900/1800/1900MHz GPRS: Class 12, TCP/ IP Voltage: 9-50vDC Current:≈22mA（12vDC） ≈12mA（24vDC） GPS positioning time: Cold start -38sec (open sky) Warm start -32sec Hot start -2sec (open sky) GPS positioning precision: 10m (2D RM) Temperature: -30℃ ~ +70℃ Humidity: 20% ~ 80% RH Dimension: 90.0(L)x45.0(W) x13.5(H)mm Weight: 45g 3.
After you send the above 2 SMS from your cell phone to your GT02, it will connect with our server. 3.1 Location search methods: GPRS background/ SMS 3.2 We based service platform: www.gootrack.net 3.3 Vehicle location information auto-uploading The GPRS time sending interval can be set to between 10s and 18000s. The factory default setting for location updates is set at 10s. 3.4 Modification of GPRS time sending interval SMS “TIMER, time (second) #” to the corresponding SIM number of GT02.
.3 Green LED(GSM status indicator) LED Status Meaning Quick flashing Continuously in bright state Continuously in dark state GSM initialization GSM conversation/Start GPRS No GSM signal 5. GT02 interface introduction 6. Method of installation 6.1 Preparation before installation Open the packing box to check whether the type of device is correct and whether the accessories are included. This product is a high-tech electronic device; installation should be undertaken by a professional.
If there is an access password, or pin, please cancel it; Testing GPRS network connection 2) Installing SIM card: Remove the upper cover of device, insert SIM card as shown then replace cover, lock the shell with 3 bolts. 6.3 Selecting installation place and fixing it. There are two kinds of installation: covert and non covert. If you need the covert installation, please refer installation to an auto electrical contractor.
is not working normally. The device will power off after power is disconnected. 9. Side key function At normal-work indication status, press the side key, all the three LEDs will extinguish and then the GT02 will enter covert working mode. Press the key again, the three LEDs will go back to normal-work indication status. 10. GPS troubleshooting 10.1 If GPS can not receive the signals normally, please drive to the open areas for positioning.
