S100 GSM House Alarm System S100 Ver 1.20 User Manual Date Issued: 2010-05-14 All rights reserved by UVI Group Corporation Limited Website: www.uvigroup.com.cn www.uvi-group.
A Top Safety and Protection Solution In The Worldwide! Table of Contents 1. Brief introduction -----------------------------------2 2. Safety Directions ------------------------------------2 3. Standard Packing list ------------------------------3 4. Physical Layout -------------------------------------3 5. Features ----------------------------------------------5 6. Settings -----------------------------------------------7 7. Operating Instructions --------------------------17 8.
A Top Safety and Protection Solution In The Worldwide! 1. Brief introduction The GSM Alarm System S100 is a new security protection solution special for home, house and office and other applications. It based on Wireless GSM Communication network, integrated Lcd Menu display and Computer technology. When any sensor activated, it will Call & Send SMS to owner’s telephone immediately. The GSM Alarm System S100 with user friendly design idea, all operations and settings are visual and intuitive!.
A Top Safety and Protection Solution In The Worldwide! Reasonable Use Please install the product at suitable places as described in the product documentation. Avoid signal screening by covering the mainframe. Use Qualified Maintenance Service Maintenance can be carried out only by qualified maintainer. Waterproofness The product is not waterproof. Please install it at dry places and keep it dry. 3.
A Top Safety and Protection Solution In The Worldwide! of this. Turn it towards inside is switch off, turn it towards outside is switch on. 2) We reserved the plastics of the output relay. Because of some of the users needn’t this function. If you want to use the output relay, please remove the plastics carefully. Then you can see the output relay connectors inside. 3) The left output relay is independent output relay; the one nearby the power socket is the alarm link output relay.
A Top Safety and Protection Solution In The Worldwide! 5. Features 5.
A Top Safety and Protection Solution In The Worldwide! 8) User friendly Icons for LED indicators, LCD and functional Buttons. 5.
A Top Safety and Protection Solution In The Worldwide! 14) Supports wiretap through the internal microphone; 15) Supports internal Speaker to special user for two-way voice communication; 16) It is Compatible with PT2262/2264 and PT2242 wireless IC; 17) Standby internal rechargeable battery which can last 12 hours; 18) Based on the GSM communication network and Operation Menu Display technology, apply to wide range situations. 6.
A Top Safety and Protection Solution In The Worldwide! entering into wiretap status. The user can listen in the alarm around sounds. If the income calling is not from the preset alarm number, after 5 tones, if hasn’t been answered, will hang up. 8) If you want to test the two way voice communication, please make sure the other phone is far from the S100, at least 500meters. Otherwise, the near-cross will make lots of noise interference. 6.1 Key-Function Descriptions. 6.1.
A Top Safety and Protection Solution In The Worldwide! Independent output relay indicator, when the independent output relay : closed, it will be on; when the independent output relay opened, will be 6.1.2 LCD ICONS Description The S100 uses the icons to descript the present status; it will be more user friendly. : Enabled the Timer to arm and disarm function; otherwise, will not display it. : Timer to Arm, has setup a time point to enter armed mode directly. : Timer to disarm.
A Top Safety and Protection Solution In The Worldwide! In standby mode, press the 1. View 2. Setup 6.2.1 View 1. Alarm Records 2.Timers 3.RF Zone Name button, you can see the Menu. ---To check the settings and event records of the system ---To setup the system functions, requires password, the default password is 1234. ---To check the alarm records, up to 20 event records will be saved. ---To check the Timer you have setup. 4.SMS Phone No.
A Top Safety and Protection Solution In The Worldwide! 1. Add/Del RF Parts 2.Basic Setting 3. Advanced Setting ---To add or remove wireless sensors or remote controls and edit their attributes. ---To setup basic parameters of the system. ---To setup the advanced parameters of the system. 6.2.2.1 Add/Del RF Parts 1.Edit RF Zone 2.Edit Remote Ctrl 3. Remove All ---To setup the zone’s attribute and add new wireless sensors to specificities zone. ---To add new remote controls.
A Top Safety and Protection Solution In The Worldwide! 2) link-Output relay for 4 minutes. After you enter the menu, the attribute of the zone will be displayed in the LCD, if this zone has been assigned wireless sensor, will display “V”. If hasn’t been assigned wireless sensor, means this zone is empty, you can assign new wireless sensor to this zone. Press Up or down button on the keyboard to check the other Zones. Press Enter to edit it.
A Top Safety and Protection Solution In The Worldwide! 07 Intrusion from Behind Balcony Normal 08 Intrusion from 1F Window Normal 09 Intrusion from 2F Window Normal 10 Intrusion from Left Fence Normal 11 Intrusion from Right Fence 12 Medical Button Alarm Normal 24-Hour zones, This attribute can not be 13 Gas Leakage Alarm 14 Smoke Fire Alarm modified. In arm or disarm or stay mode, once the sensor in these zones 15 16 Watchdog alarm SOS Help! triggered will alarm immediately.
A Top Safety and Protection Solution In The Worldwide! 1.SMS Phone No. 2. Auto-dial Tel No. 3. Time & Date ---To setup the SMS Alert Number, must be cell phone numbers, total 3. ---To setup the Auto-dial telephone number, total is 5. ---To setup the time and date information. The Format is Month-Date-Year. Press Up/Down to setup each item, press * move to next item. ---Switch on or off the siren when Alarm occurrence. ---Setup the Report time gap, Range: 5. Report Time Gap 0~240Hours.
A Top Safety and Protection Solution In The Worldwide! For example: In China, the country code is 0086, please note, do not write +86. The user cell phone number is 13570810254 and has been assigned as a SMS Alert number, the simcard number in the panel is 13512345678. Problem 1: Alarm but the user hasn’t received the SMS Alert. Solution: Please plus the country code while you setup the 13570810254 as SMS Alert number, means setup 008613570810254 to instead of the 13570810254.
A Top Safety and Protection Solution In The Worldwide! 1.Edit Timer 2. Watchdog Timer ---To setup the starting time to arm and the Ending time to disarm. ---To setup the starting and ending time to work. ---To setup the remote control operation report function. 4. GSM Jammer Alert ---To setup the GSM Jammer Alert function. 3. RCO Alert 5. Modify Password ---Modify the system password. 6. Default Set --- Restore the system settings to factory defaults.
A Top Safety and Protection Solution In The Worldwide! E.g.: Modify the first wireless zone name as Front Door Opened by Intruder! You should edit a SMS Content: 1234#M01# Front Door Opened by Intruder!# ,the 1234 is the password. Then send it to the S100 Simcard Number. 7. Operating Instructions Tips! The user can arm/disarm/Stay (Partial armed) by Remote controls, Keyboard, SMS, also, the user can cancel the alarm by Remote Controls, Keyboard, SMS to Disarm it.
A Top Safety and Protection Solution In The Worldwide! Press the button “ ” on the remote control or Press the Arm button on the keyboard then select Stay, the Control Unit enters Stay(Partial Armed) ICON will be on. In this status, the sensors had been set as status, the Stay Type triggered will alarm, but the sensors had been set as normal Type triggered will not alarm. Please see the menu of the Edit RF Zone.
A Top Safety and Protection Solution In The Worldwide! xxxxBB Example “xxxx” stands for the password 1111BB (1-4 digits). Return SMS When the Password is 1111 System deactivated. 7.2.3 Switch On the independent output relay xxxxCC Example “xxxx” stands for the password 1111CC (1-4 digits). Return SMS When the Password is 1111 Output Relay Closed. 7.2.4 Switch OFF the independent output relay xxxxDD Example “xxxx” stands for the password 1111DD (1-4 digits).
A Top Safety and Protection Solution In The Worldwide! Notice: The Output relay status in the Return SMS is the independent output relay status. It is not the alarm link Output Relay Status. 8. Installation Before installing the control unit and sensors and sirens, please help to test the system firstly, including wireless sensor, power supply, gsm signal, etc. Please ensure the wireless sensors and electricity appliances from the mainframe more than 3~5m. 8.
A Top Safety and Protection Solution In The Worldwide! In some circumstances an Infrared beam fence is more appropriate than magnetic sensors. i.e. veranda, picture window balcony, boundary wall e.t.c. Wireless glass break sensor can also be used (see below) For a Scrolling Steel Door, a special Wireless Scroll Steel Door magnetic sensor must be used due to interference of the wireless signal caused by the steel door.
A Top Safety and Protection Solution In The Worldwide! 8.3 Install the wireless PIR Motion Sensor The PIR sensor will detect a person since human temperature is different to ambient temperature. When triggered, the PIR will signal the Control Unit. Apply the detection area illustration below when installing. Wireless curtain sensor, detection area illustration below: 8.
A Top Safety and Protection Solution In The Worldwide! 8.5 Install the Control Unit In order to avoid destruction of the Control Unit by intruders, please install it in a concealed location, convenient to the operator. If applicable, ensure that an uninterruptible AC power outlet is available near the Control Unit. First connect accessories to the Control Unit then the AC adapter. 8.6 Install Siren Connect the Siren to the Control Unit and fix them in appropriate locations.
A Top Safety and Protection Solution In The Worldwide! will escape at once. The connections please see the photo; also, you can use any other electric equipment to instead of the lights. 9. Add Wireless Sensors to the Control Unit Notice: Some wireless sensors must be coded by manual as below 9.1 step; some wireless sensors needn’t coded by manual, because of we will use the learning code sensor. The learning code wireless sensor you can omit the 9.
A Top Safety and Protection Solution In The Worldwide! sensors to the control units, please help to see below: 9.1 Prepare the RF Sensors of PT2262 IC Code 1) Prepare the RF sensors, Open the back cover of the Wireless sensor carefully; 2) Locate the IC boards black jumpers, labeled A0-A7 and D0-D3. 3) Configured the A0~A7 and D0~D3 different from each wireless sensors(Includes wireless door sensor, wireless smoke sensor, wireless gas leakage sensor, wireless pir motion sensor and so on).
A Top Safety and Protection Solution In The Worldwide! a) One time can add only 1 wireless sensor; b) The Name of the RF sensor can be modified by SMS commands. Please see chapter 6.3. 9.4 Add Remote Controls to the Control unit: Because of both of the S100 and its remote controls are with learning code, you can add the remote control to the S100 directly following the 6.2.2.1 Add/Del RF Parts a) Enter the Add/Del RF Parts menu; b) c) Select 2.
A Top Safety and Protection Solution In The Worldwide! Communication protocol: GSM PHASE 2/2+ (include data service) Wireless sensor receiving frequency: 433.92 MHz Wireless sensor permission quantity: 16Pcs Remote Control permission quantity: 5Pcs Effective distance wireless of remote control: 100 m Battery: Built-in lithium-ion battery: 1000mAh@3.7V Standby time Approx.24hours (depending on the network condition) Size: 180mmX125mmX30mm (LXWXH); Net Weight: 0.32Kg 11.
A Top Safety and Protection Solution In The Worldwide! 3) If the Control Unit can run and sensors work, but cannot send SMS texts, please change SIM Card to check it. 4) If the problem cannot be solved, please contact the distributor or manufacturer. 13. Warranty 1) This system is warranted to be free of defects in material and workmanship for one year from the date of purchase. 2) This warranty does not extend to any defect, malfunction or failure caused by abuse or misuse by the Operating Instructions.
A Top Safety and Protection Solution In The Worldwide! sensor; incorrect Value; 3) Please pull out the wireless sensor 3) Haven’t pull out wireless antenna; 4) Please install the wireless sensors or 4) Electromagnetic alarm panel away the electric interference; 5) The wireless receiver manufacturer to replace it. problem. 1) PIR Motion sensor installation incorrect; 2) Used 24H zones or Alarm without 2) Please check if any sensor assigned Watchdog zone. incorrect activated.
