Installation Instructions

As shown in the figure,it is the diagram of wiring completion
DIM-
gray
DIM+
purple
Ground Wire
White Fixture Wire
Black Fixture Wire
The installation must be carried out by a qualified electrician
WARNING:
When maintaining the lamp, make sure to disconnect the power supply to prevent electric
shock. It must be operated by professional technicians. Non-professionals should not
disassemble the lamp;
Please wear gloves when disassembling the germicidal lamp;
Screw A
Upper cover B
Hasp C
A
UV germicidal lamp
B
C
1. As shown in the figure above, remove the screw
A, pull the buckle C away from the hook, lift up the
upper cover B and remove it; after installing the
ultraviolet germicidal lamp, reinstall the upper
cover B in the reverse step.
A
B
C
2. Align the pin of the lamp tube with the socket
of the lamp holder and insert it to the end, press
the lamp tail down into the buckle. When
disassembling the lamp tube, first unplug the lamp
holder from the lamp holder, and then take out the
lamp tail from the buckle.
B