User`s manual

UTV500CC User’s Manual www.UTVsFactory.com
4
as: noise, vibration, heat and so on.
(10) Damages caused by that you do not check and maintain vehicle periodically by
our requirements.
II、
、、
、Technical parameters
(I)、Common technical data
1、Mass parameters(kg)
Mass of whole equipments(not including driver)： 590Kg
Front shaft： 260Kg
Rear shaft ： 330Kg
2、Dimension parameter(mm)
Total length×total width×total height:2600×1280×1960
Minimal clearance apart from ground： 210
Wheelbase： 1730
Tread： front wheel：1036 rear wheel： 1040
Approach angle(°)：47
Removed angle(°)：82
(II)、Using data
1、High running speed(km/h)：H gear : 70
2、Small steering semi-diameter(m)： 4.65
3、Brake performance (No-load brake distance m).
When V
０
=30km/h：4.
When V
０
=40km/h：5.5
When V
０
=50km/h：9
4、0—50Km/h accelerating time（H）：7.9”
0—50Km/h accelerating time（L）：8.4”
5、Oil consumption for 100 kilometers (L)：10
6、Exhaust：Reach Euro II exhaust standard.
7、Loading capacity:： 300Kg
(III)、Engine
Type：CF188
Form：single cylinder, four-stroke, water cooling, 4 valves, top camshaft, single equal
shaft, Carburetor type.
Cylinder diameter(mm)： 87.5
Travel(mm)： 82