User`s manual

UTV500CC User’s Manual www.UTVsFactory.com
30
1. Fuel supply system
fault
① Jam in muzzle of carburetor
② Level of Floater not correct
③ Air filter is dirty
④ Leakage on air intake pipe
⑤ Too many lube
Clean or change
Adjust the height
Clean or change
Tighten or change
Drain the extra lube
2. Electrical parts
problem
① Dirt on plug
② Gap of plug not correct
③ Ignition loop problem
④ CDI problem
⑤ Magneto problem
Clean or Change
Change or Adjust
Change
Change
Change
Engine power
is not enough
3.Mechanical
problem
 Gap of Valve is not correct
 The force of valve spring is
weak.
③ Air circulation is not right.
④ Cylinder worn out
⑤ Piston Ring worn out
⑥ Valve base not correct
⑦ Swing arm or cam shaft
worn out
Change operation
method
Check, remove or
change
Adjust
Change
Change
Change or repair
Change