User`s manual

UTV500CC User’s Manual www.UTVsFactory.com
16
（ａ）、When ignition switch is at “ON” position and lamplight main switch is
turned to “ ”position, front and rear small light are lightened.
（ｂ）、When ignition switch is at “ON” position and lamplight main switch is
turned to “ ”position, front headlight and rear small light are
lightened.
（ｃ）、When ignition switch is at “ON” position and lamplight main switch is
turned to “ ”position, press down lamplight main switch handle,
headlight changes to far light from close light; raise lamplight main
switch handle, headlight changes to close light from far light;
（ｄ）、When ignition switch is at “ON” position and lamplight main switch is at
“OFF” position, raise lamplight main switch handle(feeling elastic), high
beam illumines, and high beam extinguishes after releasing the handle.
（ｅ）、When ignition switch is at “ON” position, press the red button switch at
the front of combination switch cover, warning light will flash; and pull
out button switch, warning light will extinguish.