Owner's manual

FEATURES & CONTROLS

Multifunction Meter Operation

The UXV500’s multifunction meter can be programed to dis-

play speed in MPH or Km/H, distance traveled (tripmeter) and

time (clock).

Use the MODE and SET buttons with procedures listed in the

following sections to set and display the desired information.

MODE button

SET button

Speedometer: MPH -or- Km/H Display

To toggle the multifunction meter’s speed display between MPH

and Km/H, press down the MODE button for two seconds. This

will shift the display between MPH or Km/H.

Tripmeter:

Selecting Odometer, “Trip A” or “Trip B”

To toggle the multifunction meter’s odometer and tripmeter dis-

play, press hold the SET button for two seconds and release.

This will shift the display between the odometer and the

tripmeter.