Installation Sheet

ASSEMBLY AND INSTALLATION INSTRUCTIONS
22534
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Installation Steps
1. Turn on the power at fuse or Circuit Box. Turn
power off before starting.
2. Carefully unpack your new fixture and lay out
all the parts on a clear surface.
3. Position the Circular strap through the fixing holes
onto the wall and make marks, drill pilot holes for
Wood screws into the wall, then insert the Plastic
anchor into the holes.
4. Secure Circular strap to Outlet box with Outlet box
screws, then secure the outlet box with wood
screws into Plastic anchors in the wall.
5. Loose the Screw and Strain relief adjust to the
desired height of braid wire, then secure it with
Screw and Strain relief (I).
6. Make Wire connections with Wire Connector:
---The Black wire from fixture to Black Wire from
power source.
---The White wire from Fixture to White Wire from
power source.
---Attach the Ground Wire and house ground
wire to the Circular strap with the green Ground
screw.
Carefully tuck wires back into the Outlet Box.
7. Mount the Back plate over the Circular strap and
then secure it with Mounting screws.
8. Place the Glass shade over the Socket, then secure with the Socket ring.
9. Install the light bulb (Not Supplied) in accordance with the fixture’s specifications.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
PO BOX 558/3325 GRASSY HILL RD. ROCKY MOUNT, VIRGINIA 24151
www.uttermost.com
WARNING: