Installation Sheet

ManualsBrandsUttermost ManualsLightingQuadrangle 20" Wide Urban Industrial 4 Light Cage Style Single Pendant with Taper Candle Lights by Kalizma Home

UTTERMOST

MANUFACTURERS OF WALL DECOR, LIGHTING,

DECORATIVE ACCESSORIES AND ACCENT FURNITURE

PO BOX 558/3325 GRASSY HILL RD. ROCKY MOUNT, VIRGINIA 24151

www.uttermost.com

FIG. 1

ASSEMBLY AND INSTALLATION

1. Take the parts out of the mounting package.

2. Screw (3) the CIRCULAR MOUNTING BRACKET (2) to each end of the outlet box.

Pull the House SUPPLY WIRES (6&8) and the SUPPLY GROUND WIRE (5) out from the OUTLET

BOX (1) and attach the mounting bracket assembly to the OUTLET BOX (1). (See Fig.1).

Screw the FULL THREADED NIPPLE (20) into the center hole of the MOUNTING BRACKET (2).

Adjust then tighten the nuts until nipple is fixed in place.

Adjust the length of wires needed for your installation and remove excess. Determine the number of

hanging rods to be assembled to the fixture body in relation to your hanging height. Pull supply wire

and ground wire through the selected rods.Connect rods together and hand tighten.

Install the roof CANOPY (16) through the 2 SWIVEL MOUNTS (15). Put the SAFETY CABLE (17)

with SPRING WASHER (18)on one of the SWIVEL MOUNT (15). Lock both ends of the swivel

mounts inside the canopy using BUTTERFLY NUTS (19). Insert and hang the SAFETY CABLE (17)

through the center hole of the MOUNTING BRACKET (2). (See Fig.1).

Unravel the FIXTURE LEAD WIRES (7&9) and FIXTURE GROUND WIRE (4).Attach the power

supply wires to the fixture lead wires by connecting the BLACK SUPPLY WIRE (8) to the SMOOTH

FIXTURE LEAD WIRE (9) and the white supply wire to the RIBBED FIXTURE LEAD WIRE. Loop

the GROUND WIRE (4) around the GROUND SCREW (11) of the MOUNTING BRACKET (2). Note:

Be sure to provide an extra 3” length of the GROUND WIRE (4). Connect the remaining FIXTURE

GROUND WIRE (4) to the SUPPLY GROUND WIRE (5) using WIRE CONNECTOR (10). Place

wiring and connections in the OUTLET BOX (1). (See Fig.1).

Screw the bulbs into the lamp sockets (23) and make sure they do not exceed the maximum wattage

specified on the fixture’s wattage rating capacity. MAXIMUM 60W.

ASSEMBLY & INSTALLATION

INSTRUCTIONS FOR #21528

Please read carefully and save these instructions, as you may need them at a later date.

GENERAL

All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If

you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.

Remove the fixtu

re and the mounting package from the box and make sure that no parts are missing by

referencing the illustrations on the installation instructions.

CAUTION

Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.

INSTALLATION IS NOW COMPLETED.

SWIVEL MOUNT

CANOPY

SAFETY CABLE

HANGING ROD(12inch)

HANGING ROD(6inch)

SPRING WASHER

BUTTERFLY NUT

FULL THREADED NIPPLE

HEX NUT

DECORATIVE NUT

LAMP SOCKET

GROUND SCREW (pre-attached)

WIRE CONNECTOR

SMOOTH FIXTURE LEAD WIRE

BLACK SUPPLY WIRE (not included)

RIBBED FIXTURE LEAD WIRE

WHITE SUPPLY WIRE (not included)

SUPPLY GROUND WIRE (not included)

FIXTURE GROUND WIRE

OUTLET BOX SCREW

MOUNTING BRACKET

OUTLET BOX (NOT INCLUDED)

FIXTURE FRAME/BODY

(14)

(13)

(12)

(23)

(16)

(18)

(19)

(21)

(22)

(15)

(4)

(9)

(11)

(10)

(8)

(5)

(3)

(17)

(20)

(2)

(7)

(6)

(1)

Carefully unpack all lamp parts from the carton.